Our Blog

You fireproof a steel stud frame structure by creating a complete fire protection system—not just by coating steel. This includes gypsum board layers, insulation, and fire-resistant finishes that work together. TRUSUS insight: fireproofing is system coordination, not surface painting. The gypsum board around steel studs releases water vapor under heat, delaying steel temperature rise. Insulated […]

Ceiling grids are mainly made of aluminum or galvanized steel, depending on the project’s requirements. Both materials provide strong support but serve different purposes in design and performance. TRUSUS insight: choose material based on environment, not personal preference. Aluminum grids resist corrosion and are lighter, ideal for humid rooms or decorative ceilings. Steel grids are […]

Yes, white rust on galvanized steel is a warning sign. It indicates zinc oxidation caused by trapped moisture before a stable protective film formed. While not immediately destructive, it threatens long-term corrosion resistance. TRUSUS insight: white rust is small in appearance but serious in meaning. White rust weakens the zinc layer’s integrity. It signals poor […]

Waterproof and water-resistant plasterboards are not the same. Waterproof boards are built to block liquid water, while water-resistant boards only slow moisture absorption. TRUSUS insight: both sound similar, yet they fight water in different ways. A waterproof board uses sealed surfaces and dense gypsum cores to isolate water exposure. A water-resistant board prevents humidity damage […]

C studs and U studs differ in shape, function, and position within a drywall or light steel frame system. The C stud serves as the vertical structural member, while the U stud acts as the top and bottom track that anchors the wall framework. TRUSUS insight: the shape defines its role—the C stands, the U […]

Mineral fiber ceiling tiles are made by combining mineral wool, recycled paper, and binders into a slurry, shaping the mixture, then drying, finishing, and coating it for strength and appearance. TRUSUS insight: every tile begins as a network of fibers engineered for function, not just form. During production, high-temperature furnaces melt natural rock or slag […]

Gypsum boards should always be stored flat, off the ground, and in a dry, ventilated space to prevent warping or moisture absorption. Upright storage or leaning against walls weakens the board’s core. TRUSUS insight: proper storage protects structure before installation begins. Gypsum boards are compressed materials that handle pressure well but not bending. Laying them […]

PVC gypsum ceiling tiles are more shatter-resistant than traditional plaster ceilings because their composite layers absorb stress instead of fracturing. The PVC film acts as a flexible shield over a gypsum core. TRUSUS insight: strength in ceilings comes not from hardness, but controlled flexibility. Traditional plaster cracks easily under impact or vibration. PVC gypsum tiles […]

Clean black PVC ceiling tiles using a mild detergent solution and a soft microfiber cloth. Avoid strong chemicals that damage the anti-static or UV-coated surface of the tile. TRUSUS insight: cleaning is about restoring surface energy—not removing stains. Mix warm water with neutral soap, gently wipe in circular motion, and dry immediately to prevent streaks. […]

Handle and store gypsum board in a dry, covered, and ventilated environment, raised off the ground by at least 8 cm. Stack flat, not upright, and cover with a breathable moisture-resistant sheet. TRUSUS insight: in humid Guyana, handling equals protection—every move shapes performance. Handling is not only transport—it is part of the environmental system design. […]

The typical deflection limit for gypsum board is L/240 to L/360, depending on whether it’s used for walls or ceilings. “L” represents the span between support points. TRUSUS insight: deflection defines how a board behaves as a structure, not just how it decorates. This small numerical limit ensures the board stays flat, joints don’t crack, […]

Yes, you should use moisture-resistant drywall in basements, especially along exterior walls or damp zones. It reduces mold risk and prolongs wall life under humid conditions. TRUSUS insight: moisture resistance isn’t waterproofing—it’s part of an environmental control system. Moisture-resistant drywall slows humidity transfer and protects core integrity, but it works properly only when paired with […]